§ 114-130. Nonconforming Buffers.

(a)

Where existing uses occupy both sides of a district boundary, a buffer shall be established as a condition of any permit issued for a change in use, reconstruction or addition for any nonresidential use or hotel or destination resort. The maximum buffer that can be established, given the existing buildings and drives, shall be established. If the width available is less than fifty percent (50%) of the minimum required buffer width, then a six (6) foot solid fence shall be located at the inner side of the buffer.

(b)

Where street buffers are nonconforming, the maximum buffer that can be established shall be required as a condition of the issuance of any permit for change of use, expansion or reconstruction.

( Ord. No. 006-2016 , § 1(Exh. 1), 4-13-2016)